H3C SOHO IE4300, Command Reference Manual

Page: 2786 / 3296

9
•
The track entry state is Positive if the link state of the interface is up.
•
The track entry state is Negative if the link state of the interface is down.
To display the link state of an interface, use the
display ip interface brief
command.
To modify the settings of a track entry, execute the
undo track
command to remove the track entry,
and then execute the
track interface
command again.
Examples
# Create track entry 1 and associate it with the link state of interface VLAN-interface 10.
<Sysname> system-view
[Sysname] track 1 interface vlan-interface 10
[Sysname-track-1]
Related commands
delay
display ip interface brief
( Layer 3—IP Services Command Reference )
display track
track interface physical
Use track interface physical to create a track entry associated with the physical state of an
interface and enter Track view, or enter the view of an existing track entry.
Use undo track to remove the track entry and all its settings.
Syntax
track track-entry-number interface interface-type interface-number
physical
undo track track-entry-number
Default
No track entries exist.
Views
System view
Predefined user roles
network-admin
Parameters
track-entry-number
: Specifies the track entry ID in the range of 1 to 1024.
interface-type interface-number : Specifies an interface by its type and number.
Usage guidelines
To create a track entry, you must specify the tracked object type, which is
interface physical
in this command.
To enter the view of an existing track entry, use the
track track-entry-number
command. The
tracked object type is not required.
To modify the settings of a track entry, execute the
undo track
command to remove the track entry,
and then execute the
track interface physical
command again.