H3C SOHO IE4300, Command Reference Manual

Page: 2783 / 3296

6
remote ip remote-ip-address
: Specifies the destination IP address of the BFD control
packets. The specified IP address must be the IP address of a directly connected interface.
local ip local-ip-address
: Specifies the source IP address of the BFD control packets. The
specified IP address must be the IP address of a directly connected interface.
Usage guidelines
To create a track entry, you must specify the tracked object type, which is
bfd ctrl
in this
command.
To enter the view of an existing track entry, use the
track track-entry-number
command. The
tracked object type is not required.
To modify the settings of a track entry, execute the
undo track
command to remove the track entry,
and then execute the
track bfd ctrl
command again.
When you associate Track with a BFD session, do not use the virtual IP address of a VRRP group as
the local or remote IP address of the BFD session.
Examples
# Associate track entry 1 with a control-mode BFD session. The BFD control packets use destination
IP address 192.168.1.1, source IP address 192.168.1.2, and outgoing interface VLAN-interface 2.
<Sysname> system-view
[Sysname] track 1 bfd ctrl interface vlan-interface 2 remote ip 192.168.1.1 local ip
192.168.1.2
[Sysname-track-1]
Related commands
delay
display track
track bfd echo
Use
track bfd echo
to create a track entry associated with an echo-mode BFD session and
enter Track view, or enter the view of an existing track entry.
Use
undo track
to remove the track entry and all its settings.
Syntax
track track-entry-number bfd echo interface interface-type
interface-number remote ip remote-ip-address local ip local-ip-address
undo track track-entry-number
Default
No track entries exist.
Views
System view
Predefined user roles
network-admin
Parameters
track-entry-number : Specifies the track entry ID in the range of 1 to 1024.
interface interface-type interface-number
: Specifies the outgoing interface by its
type and number of the BFD echo packets.