H3C SOHO IE4300, Command Reference Manual

Page: 2685 / 3296

1
Smart Link commands
display smart-link flush
Use
display smart-link flush
to display information about the received flush messages.
Syntax
display smart-link flush
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display information about the received flush messages.
<Sysname> display smart-link flush
Received flush packets : 10
Receiving interface of the last flush packet : GigabitEthernet1/0/1
Receiving time of the last flush packet : 19:19:03 2012/04/21
Device ID of the last flush packet : 000f-e200-8500
Control VLAN of the last flush packet : 1
Table 1 Command output
Field Description
Received flush packets Total number of received flush messages.
Receiving interface of the last flush packet Port that received the last flush message.
Receiving time of the last flush packet Time when the last flush message was received.
Device ID of the last flush packet Device ID carried in the last flush message.
Control VLAN of the last flush packet Control VLAN ID carried in the last flush message.
Related commands
reset smart-link statistics
display smart-link group
Use
display smart-link group
to display information about the specified or all smart link
groups.
Syntax
display smart-link group { group-id | all }
Views
Any view