H3C SOHO IE4300, Command Reference Manual

Page: 2653 / 3296

9
Field Description
Active status
RRPP ring status:
•
Yes —Active.
•
No —Inactive.
An RRPP ring can be active only when RRPP and the RRPP ring are both
enabled. This field also helps you identify whether RRPP is enabled.
Primary port
The primary port field means the node mode is master node or transit node.
A hyphen (-) appears when one of the following cases occurs:
•
The port is not configured on the ring.
•
The port is a member of a link aggregation group.
Secondary port
The secondary port field means the node mode is master node or transit node.
A hyphen (-) appears when one of the following cases occurs:
•
The port is not configured on the ring.
•
The port is a member of a link aggregation group.
Common port
The common port field means the node mode is edge node or assistant edge
node.
A hyphen (-) appears when one of the following cases occurs:
•
The port is not configured on the ring.
•
The port is a member of a link aggregation group.
Edge port
The edge port field means the node mode is edge node or assistant edge node.
A hyphen (-) appears when one of the following cases occurs:
•
The port is not configured on the ring.
•
The port is a member of a link aggregation group.
Port status
Port status: Down, up, or blocked.
A hyphen (-) appears when one of the following cases occurs:
•
The ring is inactive.
•
The port is not configured on the ring.
•
The port is a member of a link aggregation group.
domain ring
Use
domain ring
to configure subrings for an RRPP ring group.
Use
undo domain ring
to remove subrings from the RRPP ring group.
Syntax
domain domain-id ring ring-id-list
undo domain domain-id [ ring ring-id-list ]
Default
No subrings exist in an RRPP ring group.
Views
RRPP ring group view
Predefined user roles
network-admin
Parameters
domain-id
: Specifies an RRPP domain by its ID in the range of 1 to 128.