H3C SOHO IE4300, Command Reference Manual

Page: 2556 / 3296

5
Views
Ethernet interface view
Predefined user roles
network-admin
Parameters
mac-address
: Specifies a MAC address in the format of H-H-H, excluding multicast, all-zero, and
all-F MAC addresses. When entering a MAC address, you can omit the leading zeros in each H
section. For example, enter f-e2-1 for 000f-00e2-0001.
Usage guidelines
If multiple Ethernet interfaces on the device act as 802.1X clients, configure a unique MAC address
for each interface to ensure that they can pass 802.1X authentication.
You can use either of the following methods to configure a unique MAC address for each 802.1X
client-enabled interface:
•
Execute the mac-address command in Ethernet interface view.
•
Execute the
dot1x supplicant mac-address
command.
Examples
# Configure the 802.1X client MAC address as 0001-0001-0001 on GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] dot1x supplicant mac-address 1-1-1
dot1x supplicant password
Use dot1x supplicant password to set an 802.1X client password.
Use
undo dot1x supplicant password
to restore the default.
Syntax
dot1x supplicant password { cipher | simple } string
undo dot1x supplicant password
Default
No 802.1X client password exists.
Views
Ethernet interface view
Predefined user roles
network-admin
Parameters
cipher : Specifies a password in encrypted form.
simple
: Specifies a password in plaintext form. For security purposes, the password specified in
plaintext form will be stored in encrypted form.
string : Specifies the password. Its plaintext form is a case-sensitive string of 1 to 127 characters.
Its encrypted form is a case-sensitive string of 1 to 201 characters.
Examples
# Set the 802.1X client password to 123456 in plaintext form on a port.