H3C SOHO IE4300, Command Reference Manual

Page: 2528 / 3296

13
Usage guidelines
This command allows a device to generate logs when it detects forged RA messages. The log
information helps administrators locate and solve problems. Each log records the following
information:
•
Name of the interface that received the forged RA message.
•
Source IP address of the forged RA message.
•
Number of RA messages dropped on the interface.
The RA guard logging feature sends the log messages to the information center. The information
center can then output log messages from different source modules to different destinations. For
more information about the information center, see
Network Management and Monitoring
Configuration Guide .
Examples
# Enable the RA guard logging feature.
<Sysname> system-view
[Sysname] ipv6 nd raguard log enable
Related commands
display ipv6 nd raguard statistics
reset ipv6 nd raguard statistics
ipv6 nd raguard policy
Use
ipv6 nd raguard policy
to create an RA guard policy and enter its view, or enter the view
of an existing RA guard policy.
Use
undo ipv6 nd raguard policy
to delete an RA guard policy.
Syntax
ipv6 nd raguard policy policy-name
undo ipv6 nd raguard policy policy-name
Default
No RA guard policies exist.
Views
System view
Predefined user roles
network-admin
Parameters
policy-name
: Assigns a name to the RA guard policy. The name is a case-sensitive string of 1 to
31 characters.
Examples
# Create RA guard policy policy1 and enter its view.
<Sysname> system-view
[Sysname] ipv6 nd raguard policy policy1
[Sysname-raguard-policy-policy1]
Related commands
display ipv6 nd raguard policy