7
Field
Description
IKEv2 profile
IKEv2 profile used by the IPsec policy.
SA duration(time based)
Time-based IPsec SA lifetime, in seconds.
SA duration(traffic based)
Traffic-based IPsec SA lifetime, in kilobytes.
SA idle time
Idle timeout of the IPsec SA, in seconds.
AH string-key
AH string key. This field displays ****** if the key is configured
and it is empty if the key is not configured.
AH authentication hex key
AH authentication hexadecimal key. This field displays ****** if
the key is configured and it is empty if the key is not configured.
ESP string-key
ESP string key. This field displays ****** if the key is configured
and it is empty if the key is not configured.
ESP encryption hex key
ESP encryption hexadecimal key. This field displays ****** if the
key is configured and it is empty if the key is not configured.
ESP authentication hex key
ESP authentication hexadecimal key. This field displays ****** if
the key is configured and it is empty if the key is not configured.
Related commands
ipsec { ipv6-policy
|
policy }
display ipsec { ipv6-policy-template | policy-template }
Use
display
ipsec
{
ipv6-policy-template
|
policy-template
}
to display
information about IPsec policy templates
Syntax
display
ipsec
{
ipv6-policy-template
|
policy-template
}
[
template-name
[
seq-number
]
]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ipv6-policy-template
: Displays information about IPv6 IPsec policy templates.
policy-template
: Displays information about IPv4 IPsec policy templates.
template-name
: Specifies an IPsec policy template by its name, a case-insensitive string of 1 to
63 characters.
seq-number
: Specifies an IPsec policy template entry by its sequence number in the range of 1 to
65535.
Usage guidelines
If you do not specify any parameters, this command displays information about all IPsec policy
templates.
If you specify an IPsec policy template name and a sequence number, this command displays
information about the specified IPsec policy template entry. If you specify an IPsec policy template
Summary of Contents for SOHO IE4300
