H3C SOHO IE4300, Command Reference Manual

Page: 1744 / 3296

37
Default
No GTS parameters are configured.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
Parameters
queue queue-id : Shapes the packets in a queue specified by its ID. The value range for
queue-id is 0 to 7.
cir committed-information-rate
: Specifies the CIR in kbps. The value range for
committed-information-rate
is 8 to 102400 for 100-Mbps interfaces, 8 to 1048576 for GE
interfaces, and 8 to 10485760 for 10-GE interfaces. The specified value must be an integral multiple
of 8.
cbs committed-burst-size
: Specifies the CBS in bytes. The value range for
committed-burst-size
is 512 to 16777216, in increments of 512. The default value for this
argument is the product of 62.5 and the CIR and must be a multiple of 512. When the product is not
a multiple of 512, it is rounded up to the nearest integral multiple of 512 that is greater than the
product. A default value greater than 16777216 is converted to 16777216.
Examples
# Shape the packets of queue 1 on GigabitEthernet 1/0/1. The GTS parameters are as follows:
•
The CIR is 6400 kbps.
•
The CBS is 51200 bytes.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] qos gts queue 1 cir 6400 cbs 51200
Rate limit commands
display qos lr interface
Use
display qos lr interface
to display the rate limit configuration for interfaces.
Syntax
display qos lr interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number
: Specifies an interface by its type and number. If you do
not specify an interface, this command displays the rate limit configuration for all interfaces.
Examples
# Display the rate limit configuration for all interfaces.