H3C SOHO IE4300, Command Reference Manual

Page: 1743 / 3296

36
GTS and rate limit commands
GTS commands
display qos gts interface
Use
display qos gts interface
to display the GTS configuration for interfaces.
Syntax
display qos gts interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number
: Specifies an interface by its type and number. If you do
not specify an interface, this command displays the GTS configuration for all interfaces.
Examples
# Display the GTS configuration for all interfaces.
<Sysname> display qos gts interface
Interface: GigabitEthernet1/0/1
Rule: If-match queue 1
CIR 512 (kbps), CBS 51200 (Bytes)
Table 13 Command output
Field Description
Interface Interface name, including the interface type and interface number.
Rule Match criteria.
CIR CIR in kbps.
CBS CBS in bytes.
qos gts
Use
qos gts
to set GTS parameters on an interface.
Use
undo qos gts
to delete the GTS configuration on an interface.
Syntax
qos gts queue queue-id cir committed-information-rate [ cbs
committed-burst-size ]
undo qos gts queue queue-id