H3C SOHO IE4300, Command Reference Manual

Page: 1709 / 3296

2
Parameters
user-defined
: Specifies user-defined traffic classes.
classifier-name
: Specifies a traffic class by its name, a case-sensitive string of 1 to 31
characters. If you do not specify a traffic class, this command displays all traffic classes.
slot slot-number : Specifies an IRF member device by its member ID. If you do not specify a
member device, this command displays the traffic classes for the master device.
Examples
# Display all user-defined traffic classes.
<Sysname> display traffic classifier user-defined
User-defined classifier information:
Classifier: 1 (ID 100)
Operator: AND
Rule(s) :
If-match acl 2000
Classifier: 2 (ID 101)
Operator: AND
Rule(s) :
If-match protocol ipv6
Classifier: 3 (ID 102)
Operator: AND
Rule(s) :
-none-
Table 1 Command output
Field Description
Classifier Traffic class name and its match criteria.
Operator
Match operator you set for the traffic class. If the operator is AND, the traffic class
matches the packets that match all its match criteria. If the operator is OR, the traffic
class matches the packets that match any of its match criteria.
Rule(s) Match criteria.
if-match
Use
if-match
to define a match criterion.
Use
undo if-match
to delete a match criterion.
Syntax
if-match match-criteria
undo if-match match-criteria
Default
No match criterion is configured.