H3C SOHO IE4300, Command Reference Manual

Page: 1000 / 3296

27
Parameters
class-name
: Specifies a name for the DHCPv6 user class, a case-insensitive string of 1 to 63
characters.
Usage guidelines
In the DHCPv6 user class view, you can use the
if-match
command to configure match rules for
user classification.
Examples
# Create a DHCPv6 user class test and enter DHCPv6 user class view.
<Sysname> system-view
[Sysname] ipv6 dhcp class test
[Sysname-dhcp6-class-test]
Related commands
class pool
ipv6 dhcp policy
if-match
ipv6 dhcp option-group
Use
ipv6 dhcp option-group
to create a static DHCPv6 option group and enter its view.
Use undo ipv6 dhcp option-group to delete the specified static DHCPv6 option group.
Syntax
ipv6 dhcp option-group option-group-number
undo ipv6 dhcp option-group option-group-number
Default
No static DHCPv6 option groups exist.
Views
System view
Predefined user roles
network-admin
Parameters
option-group-number
: Assigns an ID to the static option group, in the range of 1 to 100.
Usage guidelines
A static DHCPv6 option group can use the same ID as a dynamic DHCPv6 option group. If a static
DHCPv6 option group and a dynamic DHCPv6 option group use the same ID, the static one takes
precedence over the dynamic one.
Examples
# Create static DHCPv6 option group 1 and enter its view.
<Sysname> system-view
[Sysname] ipv6 dhcp option-group 1
[Sysname-dhcp6-option-group-1]