manualshive.com logo in svg

H3C SFP-GE-SX-MM850-A, Manual, Page: 1 / 26

Share
Download
H3C SFP-GE-SX-MM850-A Manual Download Page 1

1 

Contents 

Preparing for installation ···································································· 1

 

Examining the installation site ······································································································· 1

 

Installation site selection ······································································································· 1

 

Temperature and humidity requirements ·················································································· 1

 

Power supply ······················································································································ 1

 

Grounding and lightning protection ·························································································· 2

 

Installation accessories ··············································································································· 3

 

Installation tools and equipment ···································································································· 3

 

Installing the AP ··············································································· 5

 

Pre-installation tasks··················································································································· 5

 

Installation flowchart ··················································································································· 6

 

Connecting the grounding cable ···································································································· 7

 

Connecting Ethernet cables ········································································································· 7

 

Installing the AP ························································································································ 8

 

Attaching the AP bracket to the AP·························································································· 8

 

Pole-mounting the AP ·········································································································· 9

 

Wall-mounting the AP ········································································································· 11

 

Positioning the AP ···················································································································· 13

 

Connecting IoT access units ······································································································· 14

 

Connecting the AP to the power source ························································································ 14

 

Connecting the PoE power supply ························································································ 15

 

Connecting a power injector ································································································ 15

 

Labeling cables ······················································································································· 17

 

Verifying the installation ············································································································· 17

 

Powering on the AP ·················································································································· 17

 

Verifying the network connection ······················································· 18

 

Appendix A Technical specifications ··················································· 19

 

Appendix B LEDs and ports ······························································ 20

 

LEDs ····································································································································· 20

 

Ports ····································································································································· 21

 

Optional transceiver modules ····································································································· 22

 

Transceiver module, fiber connector, and optical fiber views ······················································· 22

 

Transceiver module specifications························································································· 22

 

Appendix C Antenna radiation patterns ··············································· 25

 

 

Summary of Contents for SFP-GE-SX-MM850-A



























Reviews:

No comments