Command Manual – User Access
H3C SecPath Series Security Products
Chapter 3 PPPoE Client Configuration Commands
3-5
[H3C] interface dialer1
[H3C-dialer1] dialer-group 1
3.1.6 dialer user
Syntax
dialer user
username
undo dialer user
View
Dialer interface view
Parameter
username
:
Remote user name for PPP authentication, which is a string of 1 to 80
characters.
Description
Use the
dialer user
command to configure remote user name for authenticating the
requests when calls are received.
Use the
undo dialer user
command to cancel the remote user name.
By default, no remote user name is set.
This command is only valid on dialer interfaces of Resource-Shared DCC.
Up to 255 Dialer users can be set on one Dialer interface. When one Dialer interface is
configured with multiple users, multiple physical interfaces can access this Dialer
interface.
When a Dialer interface encapsulates PPP, the remote user that have passed PPP
authentication decides the Dialer interface that receives calls. In this case, you have
the option to configure
dialer number
command.
For the related commands, see
ppp pap local-user
,
ppp chap user
.
Example
# Set the remote username to “GWB”.
[H3C-Dialer3] dialer user GWB
3.1.7 display pppoe-client session
Syntax
display pppoe-client session
{
summary
|
packet
} [
dial-bundle-number
number
]
