Command Manual – User Access
H3C SecPath Series Security Products
Chapter 3 PPPoE Client Configuration Commands
3-1
Chapter 3 PPPoE Client Configuration Commands
3.1.1 debugging pppoe-client
Syntax
debugging pppoe-client
{
all
|
data
|
error
|
event
|
packet
|
verbose
} [
interface
type
number
]
View
User view
Parameter
all
:
Enable all PPPoE client debugging switches
data
:
Enable the PPPoE Session phase data packet debugging switch
error
:
Enable PPPoE client error information debugging switch
event
:
Enable PPPoE client event debugging switch
packet
:
Enable PPPoE Discovery phase negotiation packet debugging switch
verbose
:
Display the verbose contents of PPPoE data
interface
type number
: Interface type and number, used to enable the debugging
switch of the specified interface. If no interface is specified, the system will enable the
debugging switch of all interfaces.
Description
The command
debugging pppoe-client
is used to enable PPPoE client debugging
switch.
Example
None
3.1.2 dialer enable-circular
Syntax
dialer enable-circular
undo
dialer enable-circular
View
Dialer interface view
