Command Manual – User Access
H3C SecPath Series Security Products
Chapter 2 PPPoE Server Configuration Commands
2-1
Chapter 2 PPPoE Server Configuration
Commands
2.1.1 display pppoe-server session
Syntax
display pppoe-server session
{
all
|
packet
}
View
Any view
Parameter
all
: Displays all information about each PPPoE session.
packet
: Displays statistics about the packets on each PPPoE session.
Description
Use the
display pppoe-server
session
command to view the status and statistics of
PPPoE session.
Related command:
link-protocol ppp
,
pppoe-server bind
.
Example
# View all the session information of PPPoE.
<H3C> display pppoe-server session all
There is 1 session in total:
SID Intf State OIntf RemMAC LocMAC
2 Virtual-Template1:0 UP Ethernet0/0/0 0050.ba22.7369 00e0.fc08.f4de
Table 2-1
Output information description
Field
Description
SID Session
Identifier
Intf
The corresponding Virtual-Template interface
State
State of sessions
OIntf
corresponding Ethernet interface
RemMAC
Remote MAC, MAC address of the other end.
LocMAC Local
MAC
