5-37
Field
Description
Swap
Swap memory.
Displaying the operational status of power
modules
Use the
display power
command to display the operational status of power modules.
<Sysname> display power
Power 0 Status: Normal
Power 1 Status: Absent
Table5-4 Output description
Field
Description
Power
Number of the power module.
Status
Power module state:
•
Normal
—The power module is operating correctly.
•
Absent
—The power module is not in position.
•
Abnormal
—The power module has failed.
Displaying the temperature information of the
firewall
IMPORTANT:
Only F1020, F1030, F1050, F1060, F1070, F1080, and F1090 firewalls support the
display
environment
command.
Use the
display environment
command to display the temperature information of the firewall.
<Sysname> display environment
System Temperature information (degree centigrade):
--------------------------------------------------------------------------------
---------
Sensor Temperature LowerLimit Warning-UpperLimit Alarm-UpperLimit Shutdown-U
pperLimit
inflow 1 26 -5 48 56 NA
Table5-5 Output description
Field
Description
Sensor
Temperature sensor:
•
inflow
—Air inlet vent temperature sensor.
•
outflow
—Air outlet vent temperature sensor.
•
hotspot
—Hotspot temperature sensor.
Temperature
Current temperature.
LowerLimit
Low temperature alarm threshold.
