5
Item
Default setting
Username, password, and domain name
•
Username: admin
•
Password: Password@_
•
Domain name: See the label at the lower left corner of the
chassis access panel
Obtaining the HDM management IP addresses
To view HDM management IP addresses from the BIOS boot screen, make sure quiet boot is
disabled from the
Boot
>
Quiet
Boot
screen.
Access the BIOS boot screen as shown in
, and view the shared network port address
(HDM Shared IPv4) and dedicated network port address (HDM Dedicated IPv4).
Signing in to HDM
1.
Open the browser, and enter the HDM management IP address in the
https://HDM_ip_address
format. This section uses Internet Explorer and IP address
192.168.50.85
as an example.
2.
On the security certificate page that opens, click
Continue to this website (not
recommended)
.
Figure 19 Security certificate confirmation page
3.
On the sign-in page, select an interface language as needed, enter the username and
password, and then click
Sign in
.
The default username is
admin
) and the default password is
Password@_
.
Summary of Contents for SecCenter CSAP-SA
Page 68: ...6 Figure 20 HDM sign in page...