9
1.
Hold the cables against a slide rail.
2.
Wrap the strap around the slide rail and loop the end of the cable strap through the buckle.
3.
Dress the cable strap to ensure that the extra length and buckle part of the strap are facing
outside of the slide rail.
Figure 13 Securing cables to a slide rail
Removing the server from a rack
1.
Power down the server. For more information, see "
."
2.
Disconnect all peripheral cables from the server.
3.
Open the cable management bracket, if any.
a.
Press the tab as shown by callout 1 and pull the cable management bracket as shown in by
callout 2.
Figure 14 Releasing the cable management bracket
Summary of Contents for SecCenter CSAP-SA
Page 68: ...6 Figure 20 HDM sign in page...