H3C S9810, Hardware Installation Quick Manual, Page: 1 / 4

Installation accessories 安装附件介绍
Before installation, wear an ESD wrist strap, and make sure the wrist strap makes good
skin contact and is reliably grounded.
在以下安装交换机的过程中，操作者需佩戴防静电
腕带，请确保防静电腕带已经正确接地并与皮肤良好接触。
The installation tools are not provided with the switch. Prepare them yourself.
交换机不随机提供安装工具，请用户根据实际安装需求自己准备安装工具。
2 1
Flathead screwdriver
一字螺丝刀
Phillips screwdriver
十字螺丝刀
Diagonal pliers
斜口钳
BOM: 3104A0E2
Marker
记号笔
The installation accessories in the figure are for illustration only. Select installation
accessories as required.
交换机在不同的安装场景下，用户所需要的附件组合也有所差
异。本图仅作示意，请用户以实际的安装场景为准，选择合适的附件组合进行安装。
Grounding cable
接地线
Grounding screw
接地螺钉
Mounting brackets
挂耳
ESD wrist strap
防静电腕带
M6 screw
M6 螺钉
Cage nut
浮动螺母
Removable cable tie
可拆卸式扎带
M4 screw
M4 螺钉
Adjustable cable management
bracket (optional)
可调节式走线架 ( 选配 )
Adjustable slide rails (optional)
可伸缩式滑道（选配）
The following figures illustrate the installation positions for the accessories. Determine
installation positions for the accessories based on the installation requirements.
以下图中给出了附件的安装位置，请根据安装场景的实际需求选择合适的安装位置。
Mounting bracket installation position (two options) 安装挂耳，安装位二选一
1
Near the network ports
安装在靠近端口侧
Near the power modules
安装在靠近电源侧
2
Grounding cable installation position (two options) 安装接地线，安装位二选一
Auxiliary grounding point
安装在备用接地点
Primary grounding point
安装在主接地点
The primary and auxiliary grounding points are on the chassis sides. Install the grounding
cable before installing the switch in the rack.
交换机提供的主用接地点和备用接地点均位
于机箱侧面，为了防止机箱安装到机柜后可能会无法安装接地线，因此请先将接地线安
装到交换机的侧面接地点上。
Attaching the accessories to the switch 安装附件到交换机
Tool list 工具参考
H3C S9810 Ethernet Switch Installation Quick Start-6PW104
H3C S9810 以太网交换机 快速安装指南 -6PW104
BOM:3104A0E2
!
!