13
Figure 18 Attaching the mounting brackets and grounding cable to the S9810 switch
Rack-mounting the S9804 switch
Attaching the slide rails to the rack
1.
Determine the position on the rack for installing the slide rails.
2.
Install cage nuts (user-supplied) in the mounting holes in the rear rack posts.
3.
Align the screw holes in one slide rail with the cage nuts in a rear post, and use screws (user
supplied) to attach the slide rail to the post, as shown in
4.
Repeat the same steps to attach the other slide rail to the other rear post.
Keep the two slide rails at the same height.