Command Manual – MPLS L3VPN
H3C S9500 Series Routing Switches
Chapter 1 MPLS L3VPN Configuration Commands
1-60
LSAs; it is not transferred in any BGP extended community attribute. Different OSPF
processes can have the same route tag.
Tags configured with different commands have different priorities:
z
A tag configured with the
import-route
command has the highest priority.
z
A tag configured with the
route-tag
command has the second highest priority.
z
A tag configured with the
default tag
command has the lowest priority.
A received Type 5 or Type 7 LSA is neglected in route calculation if its tag is the same
as the local one.
Note:
A configured route tag takes effect after you issue the
reset ospf
command.
Related commands:
import-route
in
OSPF Commands
.
Examples
# Configure the route tag for OSPF process 100 as 100.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] route-tag 100
1.1.53 routing-table limit
Syntax
routing-table
limit
number
{
warn-threshold
|
simply-alert
}
undo routing-table limit
View
VPN instance view
Default Level
2: System level
Parameters
number
: Maximum number of routes for the VPN instance to support.
warn-threshold
: Threshold for rejecting new routes. It is expressed in the percentage of
the specified maximum number of routes for the VPN instance.
