Command Manual – PoE
H3C S7500 Series Ethernet Switches
Chapter 2 PoE PSU Supervision Configuration
Commands
2-5
Table 2-4
Description on the fields of the
display poe-power dc-output value
command
Field
Description
DC Out Voltage
DC output voltage
DC Output Current
DC output current
2.1.5 display poe-power switch state
Syntax
display poe-power switch state
View
Any view
Parameters
None
Description
Use the
display poe-power switch state
command to display the number and current
state of the AC power distribution switches in the external PoE PSU.
Examples
# Display the number and current state of the AC power distribution switches.
<H3C> display poe-power switch state
Switch Number : 0
Note:
Currently, the S7500 series do not use any AC power distribution switch, so the
returned value is always 0.
2.1.6 display supervision-module information
Syntax
display supervision-module information
