H3C S6890-30HF, Installation, Quick Start, Page: 1 / 4

Installation accessories
安装附件介绍
2 1
Phillips screwdriver
十字螺丝刀
Marker
记号笔
Tool list
工具参考
H3C S6890-30HF Switch Installation Quick Start-6W101
H3C S6890-30HF
交换机 快速安装指南
-6W101
ESD wrist strap
防静电腕带
Grounding cable and
grounding screw
接地线和接地螺钉
Removable cable tie
可拆卸式扎带
Mounting bracket
挂耳
Chassis rail
导轨
M4 screw
M4
螺钉
M6 screw and cage
nut (user supplied)
M6
螺钉和浮动螺母（用户自备）
Power module
filler panel
电源假面板
Long slide rail
长滑道
Installation positions for accessories
附件安装位置介绍
Mounting bracket installation position (three options)
挂耳安装位（三选一）
Chassis rail installation position (four options)
滑道导轨安装位（四选一）
A or B near the power module side
靠近电源侧，可安装在
A
或
B
任意一处
C or D near the network port side
靠近端口侧，可安装在
C
或
D
任意一处
Near the power module side
安装在靠近电源侧
Near the network port side
安装在靠近端口侧
Mid-mounting position
安装在中部
A
B
C
D
The installation tools are not provided with the switch. Prepare them yourself.
交换机不随机提供安装工具，请用户根据实际安装需求自己准备安装工具。
The switch provides only three screw holes for installing mounting brackets near the
network ports.
端口侧的挂耳安装孔只有三个。
If you install the mounting brackets near the power module side or network port side,
you also need to install chassis rails and slide rails for rack-mounting the switch.
挂耳安装在靠近端口侧或靠近电源侧时，需要有滑道、导轨配合才能将设备安装到机柜。
To rack-mount the switch by using only mounting brackets, you need to install the
mounting brackets at the mid-mounting positions.
仅使用一对挂耳安装设备到机柜时，只能将挂耳安装在设备中部。
Wear an ESD wrist strap, and make sure the wrist strap makes good skin contact and is
reliably grounded.
操作者需佩戴防静电腕带，确保防静电腕带与皮肤良好接触，并确认防静电腕带已经良好
接地。
!
Before mounting the switch in a 19-inch rack, determine the installation positions for the
mounting brackets, chassis rails, and grounding cable.
将交换机安装到19英寸机柜时，可以根据需要调整附件在交换机上的安装位置。