21
Procedure
1.
Enter system view.
system-view
2.
Enter aggregate interface view.
{
Enter Layer 2 aggregate interface view.
interface bridge-aggregation interface-number
{
Enter Layer 3 aggregate interface view.
interface route-aggregation interface-number
{
Enter Layer 3 aggregate subinterface view.
interface route-aggregation interface-number.subnumber
}
3.
Shut down the interface.
shutdown
Restoring the default settings for an aggregate interface
Restrictions and guidelines
CAUTION:
The
default
command might interrupt ongoing network services. Make sure you are fully aware of
the impacts of this command when you execute it on a live network.
The
default
command might fail to restore the default settings for some commands for reasons
such as command dependencies and system restrictions.
To resolve this issue:
1.
Use the
display this
command in interface view to identify these commands.
2.
Use their
undo
forms or follow the command reference to restore their default settings.
3.
If the restoration attempt still fails, follow the error message instructions to resolve the issue.
Procedure
1.
Enter system view.
system-view
2.
Enter aggregate interface view.
{
Enter Layer 2 aggregate interface view.
interface bridge-aggregation interface-number
{
Enter Layer 3 aggregate interface view.
interface route-aggregation interface-number
{
Enter Layer 3 aggregate subinterface view.
interface route-aggregation interface-number.subnumber
}
3.
Restore the default settings for the aggregate interface.
default
Summary of Contents for S6850 Series
Page 108: ...48 WGE1 0 3 32768 49153 50100 0x7b 0001 0001 0001 ACDEF...
Page 259: ...21 6 N A 200 6...
Page 337: ...ii...
