43
Step Command
Remarks
6.
Specify the authorization
method for login users.
authorization login
{
hwtacacs-scheme
hwtacacs-scheme-name
[
radius-scheme
radius-scheme-name
] [
local
] [
none
] |
local
[
none
] |
none
|
radius-scheme
radius-scheme-name
[
hwtacacs-scheme
hwtacacs-scheme-name
] [
local
] [
none
] }
By default, the default
authorization method is used
for login users.
The
none
keyword is not
supported in FIPS mode.
Configuring accounting methods for an ISP domain
Configuration prerequisites
Before configuring accounting methods, complete the following tasks:
1.
Determine the access type or service type to be configured. With AAA, you can configure an
accounting method for each access type and service type.
2.
Determine whether to configure the default accounting method for all access types or service types.
The default accounting method applies to all access users, but it has a lower priority than the
accounting method that is specified for an access type or service type.
Configuration guidelines
When configuring accounting methods, follow these guidelines:
•
Login users who use FTP services do not support accounting.
•
Local accounting does not provide statistics for charging. It only counts and controls the number of
concurrent users who use the same local user account. The threshold is configured by using the
access-limit enable
command.
Configuration procedure
To configure accounting methods for an ISP domain:
Step Command Remarks
1.
Enter system view.
system-view
N/A
2.
Enter ISP domain view.
domain
isp-name
N/A
3.
Specify the default
accounting method for all
types of users.
accounting default
{
hwtacacs-scheme
hwtacacs-scheme-name
[
radius-scheme
radius-scheme-name
] [
local
] [
none
] |
local
[
none
] |
none
|
radius-scheme
radius-scheme-name
[
hwtacacs-scheme
hwtacacs-scheme-name
] [
local
] [
none
] }
By default, the accounting
method is
local
.
The
none
keyword is not
supported in FIPS mode.
4.
Specify the command
accounting method.
accounting command hwtacacs-scheme
hwtacacs-scheme-name
By default, the default
accounting method is used
for command accounting.
5.
Specify the accounting
method for LAN users.
accounting lan-access
{
local
[
none
] |
none
|
radius-scheme
radius-scheme-name
[
local
] [
none
] }
By default, the default
accounting method is used
for LAN users.
The
none
keyword is not
supported in FIPS mode.