manualshive.com logo in svg

H3C S5830V2 series, Security Configuration Manual, Page: 292 / 332

Share
Download
H3C S5830V2 series Security Configuration Manual Download Page 292

 

278 

Troubleshooting IKE 

IKE negotiation failed because no matching IKE proposals 
were found 

Symptom 

1.

 

The IKE SA is in Unknown state.  

<Sysname> display ike sa 

    Connection-ID   Remote                Flag         DOI 

------------------------------------------------------------------ 

    1               192.168.222.5         Unknown      IPSEC 

Flags: 

RD--READY RL--REPLACED FD-FADING 

2.

 

When IKE event debugging and packet debugging are enabled, the following messages appear:  
IKE event debugging message: 

The attributes are unacceptable. 

IKE packet debugging message: 

Construct notification packet: NO_PROPOSAL_CHOSEN. 

Analysis 

Certain IKE proposal settings are incorrect. 

Solution 

1.

 

Examine the IKE proposal configuration to see whether the two ends have matching IKE proposals.  

2.

 

Modify the IKE proposal configuration to make sure the two ends have matching IKE proposals. 

IKE negotiation failed because no IKE proposals or IKE 
keychains are referenced correctly 

Symptom 

1.

 

The IKE SA is in Unknown state. 

<Sysname> display ike sa 

    Connection-ID   Remote                Flag         DOI 

------------------------------------------------------------------ 

    1               192.168.222.5         Unknown      IPSEC 

Flags: 

RD--READY RL--REPLACED FD-FADING 

2.

 

The following IKE event debugging or packet debugging message appeared: 
IKE event debugging message: 

Notification PAYLOAD_MALFORMED is received. 

IKE packet debugging message: 

Construct notification packet: PAYLOAD_MALFORMED. 

Summary of Contents for S5830V2 series













































































































































































































































































































































Reviews:

No comments