245
Parameters
schedule-name
: Specifies a schedule by its name, a case-sensitive string of 1 to 47 characters. If
you do not specify this option, the command displays information about all schedules.
Examples
# Display information about all schedules.
<Sysname> display scheduler schedule
Schedule name : shutdown
Schedule type : Run once after 0 hours 2 minutes
Start time : Tue Dec 27 10:44:42 2011
Last execution time : Tue Dec 27 10:44:42 2011
Last completion time : Tue Dec 27 10:44:47 2011
Execution counts : 1
-----------------------------------------------------------------------
Job name Last execution status
shutdown Successful
Table 42 Command output
Field Description
Schedule type
Execution time setting of the schedule. If no execution time is specified, this field is not
displayed.
Start time
Time to execute the schedule for the first time. If no execution time is specified, this
field is not displayed.
Last execution
time
Last time when the schedule was executed. If no execution time is specified, this field
is not displayed. If the schedule has never been executed, "Yet to be executed" is
displayed for this field.
Last completion
time
Last time when the schedule was completed. If no execution time is specified, this field
is not displayed.
Execution counts
Number of times the schedule has been executed. If the schedule has never been
executed, this field is not displayed.
Job name
Name of a job under the schedule.
Last execution
status
Result of the most recent execution:
•
Successful
.
•
Failed
.
•
Waiting
—The device is executing the schedule and the job is waiting to be
executed.
•
In process
—The job is being executed.
•
-NA-
—The execution time has not arrived yet.
To view information about whether the commands in the job has been executed and
the execution results, execute the
display scheduler logfile
command.
display system stable state
Use
display system stable state
to display system stability and status information.
Syntax
display system stable state