1-5
Field
Description
NotInstall
Normally, among routes to a destination, the route with the highest
preference is installed into the core routing table and advertised,
while a NotInstall route cannot be installed into the core routing
table but may be advertised.
Reject
The packets matching a Reject route are dropped. In addition, the
router sends ICMP unreachable messages to the sources of the
dropped packets. The Reject routes are usually used for network
testing.
Static
A static route is not lost when you perform the save operation and
then restart the router. Routes configured manually are marked as
static
.
Unicast Unicast
routes
Inactive Inactive
routes
Invalid
Invalid routes
WaitQ
The route is the WaitQ queue during route recursion.
TunE Tunnel
GotQ
The route is in the GotQ queue during route recursion.
Age
Time for which the route has been in the routing table, in the sequence of hour,
minute, and second from left to right.
Tag Route
tag
display ip routing-table acl
Syntax
display ip routing-table acl
acl-number
[
verbose
]
View
Any view
Default Level
1: Monitor level
Parameters
acl-number
: Basic ACL number, in the range of 2000 to 2999.
verbose
: Displays detailed routing table information, including inactive routes. With this argument
absent, the command displays only brief information about active routes.
