119
outbound
: Applies a scheduler policy in the outbound direction of the current interfaces.
Description
Use the
qos apply scheduler-policy
command to apply a scheduler policy in the outbound direction of an
interface or port group.
Use the
undo qos apply scheduler-policy
command to remove the scheduler policy applied in the
outbound direction of the interface or port group.
The setting in Ethernet interface view takes effect on the current port only. The setting in port group view
takes effect on all ports in the port group.
You can apply only one scheduler policy in the outbound direction of an interface.
You cannot apply a scheduler policy to a port that has been configured with any of these QoS features:
traffic shaping, congestion avoidance, and queue scheduling algorithm other than the default WRR
algorithm. Neither can you configure any of these QoS features on a port, if a scheduler policy has been
applied to it. For more information about these QoS features, see the related chapters.
On the S5800 Switch Series, you can apply a scheduler policy to only a HQoS-capable port.
Table 40
HQoS-capable port and S5800 switch model compatibility matrix
Switch model
HQoS-capable ports
•
S5800-32C
•
S5800-32C-PWR
•
S5800-56C
•
S5800-56C-PWR
•
S5800-32F
•
The four fixed 10GE ports on the front panel
•
10-GE ports on the interface card LSW1SP4P0/LSW1SP2P0
•
GE ports numbered 3, 4, 7, 8, 11, 12, 15, and 16 on the interface
card LSW1GP16P0/LSW1GT16P
S5800-60C-PWR
•
Port GigabitEthernet 1/0/49
•
10-GE ports on the interface card LSW1SP4P0/LSW1SP2P0
•
GE ports numbered 3, 4, 7, 8, 11, 12, 15, and 16 on the interface
card LSW1GP16P0/LSW1GT16P
S5800-54S
The six fixed 10GE ports on the front panel
Related commands:
qos gts
,
qos wred apply
,
qos sp
and
qos wrr
(
QoS
in the
ACL and QoS Command
Reference)
.
Examples
# Apply scheduler policy
testsp
in the outbound direction of Ten-GigabitEthernet 1/0/25.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet1/0/25
[Sysname-Ten-GigabitEthernet1/0/25] qos apply scheduler-policy testsp outbound
qos copy forwarding-group
Syntax
qos
copy
forwarding-group
fg-source
to
fg-dest
&<1-8>
View
System view
