93
[Sysname-GigabitEthernet1/0/1] qos wred apply queue-table1
qos wred queue table
Syntax
qos wred queue table
table-name
undo qos wred table
table-name
View
System view
Default level
2: System level
Parameters
table
table-name
: Specifies a name for the table.
Description
Use the
qos wred queue table
command to create a queue-based WRED table and enter WRED table
view.
Use the
undo
qos wred table
command to delete a WRED table.
By default, no global WRED table is created.
A WRED table in use cannot be removed.
Related commands:
qos wred apply
and
display qos wred interface
.
Examples
# Create a queue-based WRED table named
exp-table1
.
<Sysname> system-view
[Sysname] qos wred queue table queue-table1
[Sysname-wred-table-queue-table1]
queue
Syntax
queue
queue-id
[
drop-level
drop-level
]
low-limit
low-limit
high-limit
high-limit
[
discard-probability
discard-prob
]
undo queue
{
queue-id
|
all
}
View
WRED table view
Default level
2: System level
Parameters
queue-id
: Queue number, in the range of 0 to 7.
drop-level
drop-level
: Drop level, in the range of 0 to 2. If this argument is not specified, the subsequent
configuration takes effect on the packets in the queue regardless of the drop level.
