121
MainBoard:
Current startup saved-configuration file: flash:/startup.cfg
Next main startup saved-configuration file: flash:/startup.cfg
Next backup startup saved-configuration file: NULL
Table 17
Command output
Field Description
MainBoard
Displays the startup configuration files on the IRF master.
Current Startup saved-configuration file
Configuration file that the device has started up with.
Next main startup saved-configuration file
Main configuration file to be used at the next startup.
Next backup startup saved-configuration file
Backup configuration file to be used at the next startup.
(This file does not exist.)
If the specified next-startup configuration file has been
deleted, this comment appears next to the file name.
Slot 2
Displays the startup configuration files on IRF member 2.
Related commands
startup saved-configuration
display this
Use
display this
to display the running configuration in the current view.
Syntax
display
this
[
by-linenum
] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
Views
Any view
Default command level
1: Monitor level
Parameters
by-linenum
: Displays the number of each line.
|
: Filters command output by specifying a regular expression. For more information about regular
expressions, see
Fundamentals Configuration Guide
.
begin
: Displays the first line that matches the specified regular expression and all lines that follow.
exclude
: Displays all lines that do not match the specified regular expression.
include
: Displays all lines that match the specified regular expression.
regular-expression
: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
Use this command to verify the configuration you have made in a certain view.
Typically, this command does not display parameters that are set to their default settings.
Some parameters can be successfully configured even if their dependent features are not enabled. For
these parameters, this command displays their settings after the dependent features are enabled.
