H3C S5590-HI Series, Manual

Page: 20 / 40

Table3-2 Expansion card and expansion slot compatibility for the S5590-48T4XC-HI and
S5590-48S4XC-HI switches
Expansion
card
S5590-48T4XC-HI
S5590-48S4XC-HI
Expansion slot 1 Expansion slot 2
mode0 mode1 mode2 mode0 mode1 mode2
LSPM6FWD Supported
Not
supported
Supported Supported Supported Supported
LSWM2EC
Not
supported
Supported Supported Supported Supported Supported
LSWM2QP2
P
Supported
Not
supported
Supported Supported Supported Supported
LSWM2SP2
PB Not
supported
Supported Supported Supported Supported Supported
LSWM2SP4
PB Not
supported
Supported Supported Supported Supported Supported
LSWM2SP8
P Not
supported Not
supported
Supported Supported Supported Supported
LSWM2ZQP
2P Not
supported Not
supported Not
supported
Supported Supported Supported
LSWM2ZSP
8P Not
supported Not
supported Not
supported
Supported Supported Supported
The power supplies support asset management. You can use the
display device manuinfo
command to view the name, sequence number, and vendor of the power supply you have installed
on the switch.
For non-PoE switches, you can install one power supply, or two power supplies for 1+1 redundancy
on the switch.
For PoE switches, you can install one power supply, or two power supplies for 1+1 redundancy on
the switch. PoE capabilities vary by power supply configuration. When a power supply fails, PoE
capabilities of the switch might decrease. For more information about PoE power capacity, see
Table1-5 .
The switch uses removable fan trays. Do not power on the switch if it does not have two fan trays of
the same model installed.
For the S5590-48T4XC-HI and S5590-48S4XC-HI switches, you can use the
port-speed-mode
command to configure the port rate mode for an expansion slot. By default, the port rate mode for an
expansion slot is mode0. To have the configuration take effect, you must save the configuration and
restart the switch. For more information about the
port-speed-mode command, see Ethernet
interface commands in the command reference for the switch.
The S5590-28P8XC-EI (LS-5590-28P8XC-EI-GL), S5590-48P6XC-EI (LS-5590-48P6XC-EI-GL),
S5590-28S8XC-EI (LS-5590-28S8XC-EI-GL), and S5590-48S4XC-EI (LS-5590-48S4XC-EI-GL)
switches support shipping with fan trays and power supplies installed. For the switch to be shipped
with fan trays or power supplies installed, contact the marketing staff.