2-7
Installing the switch in a 19-inch rack
Installation methods
Table 2-2 Installation methods for the S5560S-EI and the S5130S-HI switches
Chassis
Installation
methods
Installation requirements
Installation
procedure
S5560S-28F-EI
S5560S-52F-EI
S5560S-28P-EI
S5560S-52P-EI
S5560S-28S-EI
S5560S-52S-EI
S5130S-28S-HI
S5130S-52S-HI
S5130S-28C-HI
S5130S-52C-HI
Using front
mounting
brackets
Install the front mounting brackets at the
port side or the power supply side.
See
"
switch by using front
mounting brackets
."
S5560S-28S-PWR-
EI
S5560S-52S-PWR-
EI
S5130S-28S-PWR-
HI
S5130S-28S-UPW
R-HI
S5130S-52S-PWR-
HI
S5130S-28C-PWR-
HI
S5130S-52C-PWR-
HI
Using front and
rear mounting
brackets
•
Install the front mounting brackets at
the port side or power supply side.
•
Install the rear mounting brackets
according to the rack depth.
If the rack depth is in the range of
429 to 595 mm (16.89 to 23.43 in),
orient the bracket with the wide
flange inside the rack.
If the rack depth is in the range of
274 to 440 mm (10.79 to 17.32 in)
and the distance from the rear rack
posts to the inner surface of the
cabinet door is longer than 153 mm
(6.02 in), orient the bracket with the
wide flange outside the rack.
•
To use PSR1110-56A power supplies,
do not install the switch in a rack with a
depth of 600 mm (23.62 in)
See
"
switch by using front
and rear mounting
brackets
Figure 2-2 Procedure for rack-mounting the switch by using the front mounting brackets
Figure 2-3 Procedure for rack-mounting the switch by using the front and rear mounting
brackets
Select an installation
position for the
mounting brackets
(near the port side or
power supply side)
Attach the mounting
brackets to the switch
Mount the switch in
the rack
Select an installation
position for the front
mounting brackets
(near the port side or
power supply side)
Attach the front
mounting brackets to
the switch
Attach the shoulder
screws to the switch
Attach the rear
mounting brackets to
the rack
Mount the switch in
the rack
