Command Manual – AAA&RADIUS&HWTACACS
H3C S3610&S5510 Series Ethernet Switches
Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
1-23
Example
# Allow users in ISP domain aabbcc.net to enable the idle-cut attribute in user template
(that is, allow the user to use the idle-cut function), with the maximum idle time of 50
minutes.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] domain aabbcc.net
[Sysname-isp-aabbcc.net] idle-cut enable 50
1.1.21 level
Syntax
level level
undo level
View
Local user view
Parameter
level
: Priority level of the user. It is an integer ranging from 0 to 3 and defaulting to 0.
Description
Use the
level
command to set the priority level of the user.
Use the
undo level
command to restore the default priority level of the user.
Note that:
z
If the configured authentication method is none or requires a password, the
command level that a user can access after login is determined by the level of the
user interface.
z
If the configured authentication method requires a user name and a password, the
command level that a user can access after login is determined by the priority level
of the user. For SSH users, when they use RSA shared keys for authentication,
the commands they can access are determined by the levels sets on the user
interfaces.
Related command:
local-user
.
Example
# Set the level of user1 to 3.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] local-user user1
