H3C S5500-SI Series, Operation Manual

Page: 996 / 1217

1-9
To do… Use the command… Remarks
Display electrical label
information of the device
display device manuinfo Available in any view
Display the temperature
information of devices
display environment
Available in any view
Display the operating state of
fans in a device
display fan fan-id Available in any view
Display the usage of the
memory of a device
display memory Available in any view
Display the power state of a
device
display power [ power - id ] Available in any view
Display state of the redundant
power system (RPS)
display rps [ rps-id ] Available in any view
Display the reboot type of a
device
display reboot-type Available in any view
Display the reboot time of a
device
display schedule reboot Available in any view
Display detailed configurations
of the scheduled automatic
execution function
display schedule job Available in any view
Display the exception handling
method
display system-failure Available in any view
Device Management Configuration Examples
Remote Scheduled Automatic Upgrade Configuration Example
Network requirement
z
As shown in Figure 1-2 , the current software version is soft-version1 for Device. Upgrade the
software version of Device to soft-version2 and configuration file to new-config at a time when
few services are processed (for example, at 3 am) through remote operations.
z
The newest application soft-version2.bin and the newest configuration file new-config.cfg are
both saved under the aaa directory of the FTP server.
z
The IP address of Device is 1.1.1.1/24, the IP address of the FTP server is 2.2.2.2/24, and the FTP
server is reachable.
z
User can log in to Device via Telnet and a route exists between User and Device.