1-5
Configuration
System clock displayed by the
display clock command
Example
If the value of
"
date-time
"±"
zone-offset
" is not in the
summer-time range,
"date-time"±"zone-offset" is displayed.
Configure: clock datetime 1:00
2007/1/1, clock timezone zone-time
add 1 and clock summer-time ss
one-off 1:00 2007/1/1 1:00 2007/8/8 2
Display: 04:00:00 ss Mon 01/01/2007
1, 2 and 3 or 1, 3
and 2
If the value of
"
date-time
"±"
zone-offset
" is in the
summer-time range,
"date-time"±"zone-offset"+”summer-of
fset” is displayed.
Configure: clock timezone zone-time
add 1, clock summer-time ss one-off
1:00 2008/1/1 1:00 2008/8/8 2 and
clock datetime 1:00 2007/1/1
Display: 01:00:00 zone-time Mon
01/01/2007
If
date-time
is not in the daylight saving
time range,
date-time
is displayed.
Configure: clock timezone zone-time
add 1, clock summer-time ss one-off
1:00 2008/1/1 1:00 2008/8/8 2 and
clock datetime 1:30 2008/1/1
Display: 23:30:00 zone-time Mon
12/31/2007
[1], 2, 3 and 1 or
[1], 3, 2 and 1
date-time
is in the daylight saving time
range:
If the value of
“date-time”-“summer-offset”
is not in
the summer-time range,
“date-time”-“summer-offset”
is
displayed;
If the value of
“date-time”-“summer-offset”
is in the
summer-time range,
date-time
is
displayed.
Configure: clock timezone zone-time
add 1, clock summer-time ss one-off
1:00 2008/1/1 1:00 2008/8/8 2 and
clock datetime 3:00 2008/1/1
Display: 03:00:00 ss Tue 01/01/2008
Enabling/Disabling the Display of Copyright Information
z
With the display of copyright information enabled, the copyright information is displayed when a
user logs in through Telnet or SSH, or when a user quits user view after logging in to the device
through the console port, AUX port, or VTY interface. The copyright information will not be
displayed under other circumstances. The display format of copyright information is as shown
below:
****************************************************************************
* Copyright (c) 2004-2008 Hangzhou H3C Tech. Co., Ltd. All rights reserved.*
* Without the owner's prior written consent, *
* no decompiling or reverse-engineering shall be allowed. *
****************************************************************************
z
With the display of copyright information disabled, under no circumstances will the copyright
information be displayed.
Follow these steps to enable/disable the display of copyright information:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enable the display of copyright
information
copyright-info
enable
Optional
Enabled by default.
Summary of Contents for S5500-SI Series
