62
To do…
Use the command…
Remarks
Set the size of the
history command
buffer
history-command max-size
value
Optional
By default, the buffer saves 10
history commands at most.
Set the idle-timeout
timer
idle-timeout
minutes
[
seconds
]
Optional
The default idle-timeout is 10
minutes. The system automatically
terminates the user’s connection if
there is no information interaction
between the device and the user
within the idle-timeout time.
Setting idle-timeout to 0 disables the
timer.
CAUTION:
•
The common settings configured for console login take effect immediately. If you configure the common
settings after you log in through the console port, the current connection may be interrupted, so you
should use another login method. After you configure common settings for console login, you need to
modify the settings on the terminal to make them consistent with those on the device.
•
The baud rate of the console port must be lower than the transmission rate of the modem. Otherwise,
packets may be lost.
Displaying and maintaining CLI login
To do…
Use the command…
Remarks
Display information about the user
interfaces that are being used
display users
[
|
{
begin
|
exclude
|
include
}
regular-expression
]
Available in any view
Display information about all user
interfaces that the device supports
display users all
[
|
{
begin
|
exclude
|
include
}
regular-expression
]
Available in any view
Display user interface information
display user-interface
[
num1
|
{
aux
|
vty
}
num2
] [
summary
] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
Available in any view
Display the configuration of the
device when it serves as a Telnet
client
display telnet client configuration
[
|
{
begin
|
exclude
|
include
}
regular-expression
]
Available in any view
Release a specified user interface
free user-interface
{
num1
| {
aux
|
vty
}
num2
}
Available in user view
Multiple users can log in to the
system to simultaneously configure
the device. You can execute the
command to release the
connections established on the
specified user interfaces.
You cannot use this command to
release the connection that you are
using.
