Quick Start
H3C S5500-EI Series Ethernet Switches
Chapter 3 Installation
3-1
Chapter 3 Installation
Caution:
When you ask your sales agent to maintain the switch, you must
ensure that the dismantlement-preventive seal on a mounting screw of
the H3C switch chassis is intact. If you want to open the chassis, you
should contact the agent for permission. Otherwise, you will bear any
consequence resulting from your actions without permission.
3.1 Installing the Switch into a 19-Inch
Cabinet
You can install the switch into a 19-inch standard cabinet in one of
the following four ways:
z
Use front mounting ears
z
Use front mounting ears and rear mounting ears
z
Use front mounting ears and a tray
z
Use front mounting ears and guide rails
The selection of installation methods depends on the width and
depth of the switch. For the installation methods, see Table 3-1.
