2
Field Description
Description
Description you have configured for the member device.
•
If no description is configured, this field displays a dashed line (-----).
•
If the description exceeds the maximum number of characters that can be
displayed, an ellipsis (…) is displayed in place of the exceeding text. To
display the complete description, use the
display current-configuration
command.
The Bridge MAC of the
IRF is
Bridge MAC address of the IRF fabric.
Auto upgrade
Status of the software auto-update function:
•
yes
—Enabled. The master propagates its software images automatically to
the device you are adding to the IRF fabric.
•
no
—Disabled. You must manually make sure the joining device uses the
same software images as the master. If the software images are different,
the new device cannot join the IRF fabric.
MAC persistent
IRF bridge MAC persistence setting:
•
6 min
—Bridge MAC address of the IRF fabric remains unchanged for 6
minutes after the address owner leaves.
•
always
—Bridge MAC address of the IRF fabric does not change after the
address owner leaves.
•
no
—Bridge MAC address of the current master replaces the original bridge
MAC address as soon as the owner of the original address leaves.
Domain ID
Domain ID of the IRF fabric. The domain ID you assign to an IRF fabric must
uniquely identify the fabric in a multi-IRF fabric network.
Related commands
•
display irf configuration
•
display irf topology
display irf configuration
Use
display irf configuration
to display basic IRF settings, including each member's current
member ID, new member ID, and physical interfaces bound to the IRF ports. The new member IDs
take effect at reboot.
Syntax
display irf configuration
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display basic IRF settings.
<Sysname> display irf configuration
MemberID NewID IRF-Port1 IRF-Port2
2 2 Ten-GigabitEthernet2/0/25 Ten-GigabitEthernet2/0/26
5 5 Ten-GigabitEthernet5/0/25 Ten-GigabitEthernet5/0/26
Ten-GigabitEthernet5/0/27
