51
Ethernet link aggregation configuration
commands
description
Syntax
description
text
undo description
View
Layer 2 aggregate interface view
Default level
2: System level
Parameters
text
: Specifies the interface description, a string of 1 to 80 characters. Valid characters and symbols
include English letters (A to Z, a to z), digits (0 to 9), special English characters, spaces, and other
Unicode characters and symbols.
Description
Use the
description
command to configure a description for an interface. For example, you can include
information such as the purpose of the interface for the ease of management.
Use the
undo description
command to restore the default.
By default, the description of an interface is
interface-name
Interface
. For example, the default
description of Bridge-Aggregation1 is
Bridge-Aggregation1 Interface
.
Examples
# Set the description of Layer 2 aggregate interface Bridge-Aggregation 1 to
connect to the lab
.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] description connect to the lab
display interface bridge-aggregation
Syntax
display
interface
bridge-aggregation
[
brief
[
down
] ] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
display
interface
bridge-aggregation
interface-number
[
brief
] [
|
{
begin
|
exclude
|
include
}
regular-expression
]
View
Any view
