H3C S5120-EI Series, Operation Manual

Page: 537 / 1191

1-23
To do… Use the command… Remarks
Enter system view
system-view
—
Create a RADIUS scheme and
enter RADIUS scheme view
radius scheme
radius-scheme-name
Required
Not defined by default
A RADIUS scheme can be referenced by more than one ISP domain at the same time.
Specifying the RADIUS Authentication/Authorization Servers
Follow these steps to specify the RADIUS authentication/authorization servers:
To do… Use the command… Remarks
Enter system view
system-view
—
Create a RADIUS scheme and
enter RADIUS scheme view
radius scheme
radius-scheme-name
Required
Not defined by default
Specify the primary RADIUS
authentication/authorization server
primary authentication
ip-address
[
port-number
]
Specify the secondary RADIUS
authentication/authorization server
secondary authentication
ip-address
[
port-number
]
Required
Configure at least one of the
commands
No authentication server by default
z
It is recommended to specify only the primary RADIUS authentication/authorization server if
backup is not required.
z
If both the primary and secondary authentication/authorization servers are specified, the
secondary one is used when the primary one is unreachable.
z
In practice, you may specify two RADIUS servers as the primary and secondary
authentication/authorization servers respectively. At one time, a server can be the primary
authentication/authorization server for a scheme and the secondary authentication/authorization
servers for another scheme.
z
The IP addresses of the primary and secondary authentication/authorization servers for a scheme
cannot be the same. Otherwise, the configuration fails.
Specifying the RADIUS Accounting Servers and Relevant Parameters
Follow these steps to specify the RADIUS accounting servers and perform related configurations:
To do… Use the command… Remarks
Enter system view
system-view
—
Create a RADIUS scheme and
enter RADIUS scheme view
radius scheme
radius-scheme-name
Required
Not defined by default