Operation Manual – IPv6 Routing
H3C S3610&S5510 Series Ethernet Switches
Chapter 5 IPv6 BGP Configuration
5-17
To do...
Use the command...
Remarks
Enable route refresh
peer
{
ipv6-group-name
|
ipv6-address
}
capability-advertise
route-refresh
Optional
Enabled by default
II. Perform manual soft-reset
Follow these steps to perform manual soft reset:
To do...
Use the command...
Remarks
Enter system view
system-view
—
Enter BGP view
bgp
as-number
Required
Enter IPv6 address family
view
ipv6-family
—
Save all routes from a
peer/peer group, not
letting them go through
the inbound policy
peer
{
ipv6-group-name |
ipv6-address
}
keep-all-routes
Optional
Not saved by default.
Return to user view
return
Soft-reset BGP
connections manually
refresh bgp
ipv6
{
all
|
ipv6-address
|
group
ipv6-group-name
|
external
|
internal
} {
export
|
import
}
Required
Note:
If the
peer
keep-all-routes
command is used, all routes from the peer/peer group will
be saved regardless of whether the filtering policy is available. These routes will be
used to generate IPv6 BGP routes after soft-reset is performed.
5.6.4 Configuring the Maximum Number of Load-Balanced Routes
Follow these steps to configure the maximum number of load balanced routes:
To do...
Use the command...
Remarks
Enter system view
system-view
—
Enter BGP view
bgp
as-number
Required
Enter IPv6 address family
view
ipv6-family
—