Operation Manual – IPv6 Routing
H3C S3610&S5510 Series Ethernet Switches
Chapter 5 IPv6 BGP Configuration
5-10
To do...
Use the command...
Remarks
Apply a routing policy to
routes advertised to a
peer/peer group
peer
{
ipv6-group-name
|
ipv6-address
}
route-policy
route-policy-name
export
Required
Not applied by default
Specify an IPv6 ACL to
filer routes advertised to a
peer/peer group
peer
{
ipv6-group-name
|
ipv6-address
}
filter-policy
acl6-number
export
Required
Not specified by default
Specify an AS path ACL
to filer routes advertised
to a peer/peer group
peer
{
ipv6-group-name
|
ipv6-address
}
as-path-acl
as-path-acl-number
export
Required
Not specified by default
Specify an IPv6 prefix list
to filer routes advertised
to a peer/peer group
peer
{
ipv6-group-name
|
ipv6-address
}
ipv6-prefix
ipv6-prefix-name
export
Required
Not specified by default
Note:
z
Members of a peer group must have the same outbound route policy with the peer
group.
z
IPv6 BGP advertises routes passing the specified policy to peers. Using the
protocol
argument can filter only the specified protocol routes. If no
protocol
specified, IPv6
BGP filters all routes to be advertised, including redistributed routes and routes
imported using the
network
command.
5.4.5 Configuring Route Reception Policy
Follow these steps to configure route reception policy:
To do...
Use the command...
Remarks
Enter system view
system-view
—
Enter BGP view
bgp
as-number
—
Enter IPv6 address family
view
ipv6-family
—
Configure inbound route
filtering
filter-policy
{
acl6-number
|
ipv6-prefix
ipv6-prefix-name
}
import
Required
Not configured by default
