Operation Manual – IPv4 Routing
H3C S3610&S5510 Series Ethernet Switches
Chapter 6 Routing Policy Configuration
6-14
192.168.2.0/24 1 Type2 1 192.168.1.2 192.168.2.2
Total Nets: 5
Intra Area: 1 Inter Area: 0 ASE: 4 NSSA: 0
6.7 Troubleshooting Routing Policy Configuration
6.7.1 IPv4 Routing Information Filtering Failure
I. Symptom
Filtering routing information failed, while routing protocol runs normally.
II. Analysis
At least one item of the IP prefix list should be configured as permit mode, and at least
one node in the Route-policy should be configured as permit mode.
III. Processing procedure
1) Use
the
display ip ip-prefix
command to display IP prefix list information.
2) Use
the
display route-policy
command to display routing policy information.
