Operation Manual – Login
H3C S3610&S5510 Series Ethernet Switches
Chapter 2 Logging in Through the Console Port
2-3
Figure 2-4
Set port parameters terminal window
z
Turn on the switch. The user will be prompted to press the Enter key if the switch
successfully completes POST (power-on self test). The prompt (such as <H3C>)
appears after the user presses the Enter key.
z
You can then configure the switch or check the information about the switch by
executing commands. You can also acquire help by type the ? character. Refer to
the following chapters for information about the commands.
2.3 Console Port Login Configuration
2.3.1 Common Configuration
lists the common configuration of Console port login.
