H3C S3610-28F, Operation Manual

Page: 1429 / 1547

Operation Manual – MCE
H3C S3610&S5510 Series Ethernet Switches
Chapter 2 MCE Configuration
2-4
Operation Command Description
Configure the maximum
number of routes a VPN
instance can
accommodate
routing-table limit
number { warn-threshold |
simply-alert }
Optional
Not configured by default
Apply a route policy for
the routes received import route-policy
route-policy
Optional
By default, all routes
matching the VPN target
attribute are permitted.
Apply a route policy for
the routes to be
advertised
export route-policy
route-policy
Optional
By default, all routes
matching the VPN target
attribute are permitted.
Note:
z
This attribute can be advertised with a route only when BGP runs between the MCE
and the PE. Otherwise, this attribute is of no sense.
z
The VPN target specified for a VPN instance on the MCE device must be same as
that specified for the VPN instance on the PE device.
2.2 Configuring Route Exchange between a MCE and a Site
2.2.1 Configuring Route Exchange between a MCE and a Site
Table 2-6 Configure route exchange between a MCE and a site
Operation Description Related section
Configure to use static
routes between a MCE and
a site See 2.2.2 “ Configuring to Use
Static Routes between a MCE and
a Site
”
Configure to use RIP
between a MCE and a site
See 2.2.3 “ Configuring to Use
Static Routes between a MCE and
a Site
”
Configure to use OSPF
between a MCE and a site See 2.2.4 “ Configuring to Use
OSPF between a MCE and a Site ”
Configure to use IS-IS
between a MCE and a site See 2.2.5 “ Configuring to Use
IS-IS between a MCE and a Site ”
Configure to use EBGP
between a MCE and a site
You can
choose one or
multiple
configurations
as required.
See 2.2.6 “ Configuring to Use
EBGP between a MCE and a Site ”