Operation Manual – System Maintaining and Debugging
H3C S3610&S5510 Series Ethernet Switches
Chapter 2 System Maintaining and Debugging
2-4
To do…
Use the command…
Remarks
tracert
[
-a
source-ip
|
-f
first-ttl
|
-m
max-ttl
|
-p
port
|
-q
packet-number
|
-vpn-instance
vpn-instance-name
|
-w
timeout
] *
remote-system
Optional
Used in IPv4 network
Available in any view
View the routes
from the source to
the destination
tracert ipv6
[
-f
first-ttl
|
-m
max-ttl
|
-p
port
|
-q
packet-number
|
-w
timeout
] *
remote-system
Optional
Used in IPv6 network
Available in any view
Note:
z
For a low-speed network, you are recommended to set a larger value for the timeout
timer (indicated by the
-t
parameter in the command) when configuring the
ping
command.
z
Only the directly connected segment address can be pinged if the outgoing interface
is specified with the
-i
argument.
2.2.2 System Debugging
To do…
Use the command…
Remarks
Enable the terminal
monitoring of system
information
terminal monitor
Optional
The terminal monitoring
on the console is enabled
by default and that on the
monitoring terminal is
disabled by default.
Enable the terminal
display of debugging
information
terminal debugging
Required
Disabled by default
Available in user view
Enable debugging for a
specified module
debugging
{
all
[
timeout
time
] |
module-name
[
option
] }
Required
Disabled by default
Available in user view
Display the enabled
debugging functions
display
debugging
[
interface
interface-type
interface-number
]
[
module-name
]
Optional
Available in any view
