Operation Manual – Information Center
H3C S3610&S5510 Series Ethernet Switches
Chapter 1 Information Center Configuration
1-8
Table 1-4
Default output rules for different output directions
LOG
TRAP
DEBUG
Output
directio
n
Module
s
allowe
d
Enable
d/disab
led
Severit
y
Enable
d/disab
led
Severit
y
Enable
d/disab
led
Severit
y
Consol
e
default
(all
module
s)
Enable
d
warning
s
Enable
d
debuggi
ng
Enable
d
debuggi
ng
Monitori
ng
terminal
default
(all
module
s)
Enable
d
warning
s
Enable
d
debuggi
ng
Enable
d
debuggi
ng
Log
host
default
(all
module
s)
Enable
d
informat
ional
Enable
d
debuggi
ng
Disable
d
debuggi
ng
Trap
buffer
default
(all
module
s)
Disable
d
informat
ional
Enable
d
warning
s
Disable
d
debuggi
ng
Log
buffer
default
(all
module
s)
Enable
d
warning
s
Disable
d
debuggi
ng
Disable
d
debuggi
ng
SNMP
NMS
default
(all
module
s)
Disable
d
debuggi
ng
Enable
d
warning
s
Disable
d
debuggi
ng
II. Enabling the display of system information on the console
After setting to output system information to the console, you need to enable the
associated display function to display the output information on the console.
Follow these steps in user view to enable the display of system information on the
console:
To do…
Use the command…
Remarks
Enable the monitoring of
system information on the
console
terminal monitor
Optional
Enabled on the console
and disabled on the
monitoring terminal by
default.
Enable the display of
debug information on the
console
terminal debugging
Required
Disabled by default