Operation Manual – SNMP-RMON
H3C S3610&S5510 Series Ethernet Switches
Chapter 1 SNMP Configuration
1-8
To do…
Use the command…
Remarks
Configure the lifetime for
Traps
snmp-agent trap life
seconds
Optional
120 seconds by default
Note:
The extended linkUp/linkDown Traps comprise the standard linkUp/linkDown Traps
defined in RFC plus interface description and interface type. If the extended messages
are not supported on NMS, you can disable this function and enable the device to send
standard linkUp/linkDown Traps.
1.5 Displaying and Maintaining SNMP
To do…
Use the command…
Remarks
Display SNMP-agent
system information,
including the contact,
location, and version of
the SNMP
display snmp-agent sys-info
[
contact
|
location
|
version
]*
Display SNMP agent
statistics
display snmp-agent statistics
Display the SNMP agent
engine ID
display snmp-agent local-engineid
Display SNMP agent
group information
display snmp-agent group
[
group-name
]
Display the modules that
can send Traps and
whether their Trap
sending is enabled or not
display snmp-agent trap-list
Display SNMP v3 agent
user information
display snmp-agent usm-user
[
engineid
engineid
|
username
user-name
|
group
group-name
] *
Display SNMP v1 or v2c
agent community
information
display snmp-agent community
[
read
|
write
]
Display MIB view
information for an SNMP
agent
display snmp-agent mib-view
[
exclude
|
include
|
viewname
view-name
]
Available in
any view
