Operation Manual – QoS
H3C S3610&S5510 Series Ethernet Switches
Chapter 3 QoS Policy Configuration
3-5
3.4.3 Defining a Traffic Behavior
To define a traffic behavior, you need to create a traffic behavior and then configure
attributes for it in traffic behavior view.
If you want to define a
primap
behavior, you need to define a priority mapping table as
for more information.
I. Configuration procedure
Follow these steps to define a traffic behavior:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Create a traffic
behavior and enter the
corresponding traffic
behavior view
traffic behavior behavior-name
Required
behavior-name
:
Behavior name.
This operation leads
you to traffic
behavior view
